2004 Beneteau Oceanis 423 "XALI", Brisbane Marina, Brisbane, California / San Francisco Bay

References

• 2004 Beneteau Oceanis Clipper 423 XALIlistingPrivate seller via YachtWorldPrimary current listing for price, equipment, maintenance and seller claims.
• XALI detailed listing mirrorotherBoat Export USA[listing mirror] Preserves detailed dimensions and equipment copied from the seller's listing; its 1,400-hour field conflicts with the current 1,600-hour seller description.
• Oceanis Clipper 423 Heritage PageotherBeneteau[manufacturer record] Manufacturer model archive identifying Groupe Finot and the Oceanis Clipper 423 range.
• Beneteau 423 Owner's Manual, revision 02otherBeneteau manual reproduction[owner manual] Dated February 19, 2004 and therefore contemporaneous with XALI. Contains dimensions, three keel variants, rigging, systems, CE category and maximum load.
• Oceanis Clipper 423 BrochureotherBeneteaumay not fit this hull[manufacturer brochure] Dated August 2005, one year after XALI. Useful model-level context but not proof of her delivered configuration.
• Oceanis Clipper 423 General Specificationsmanufacturer specBeneteaumay not fit this hullDated July 2006. Construction details are useful, but later equipment is not evidence about a 2004 hull.
• Beneteau 423 SpecificationsotherSailboatData[design database] Model-level dimensions and ratios; actual hull and keel variant remain subject to survey.
• Beneteau 423 Boat TestotherSailing Magazine[published review] Contemporaneous September 2003 review covering construction, performance, tankage and interior ergonomics.
• Volvo Penta D2-55/D2-75 Workshop Manualengine manualVolvo Penta manual reproductionIdentifies the D2-55 A/B/C alternator as 14V/60A and provides model-specific service information.
• Inmar Aluma-Lite Aluminum RIB SpecificationsotherInmar[manufacturer product] Model-family reference for the included 9ft 2in aluminum RIB; confirm the capacity plate and exact tube fabric on XALI's tender.
• Inmar 280 Aluma-Lite RIB SpecificationsotherDinghyPro[equipment reference] Identifies the 9ft 2in Inmar 280 aluminum RIB with Hypalon tubes; confirm XALI's exact model plate and fabric because the listing itself only says aluminum RIB.
• Marine Survey Cost GuideotherSan Diego Marine Surveyors[survey cost reference] Used only to inform pre-purchase survey cost.
• Haul-Out Costs ExplainedotherBoatyards.com[yard cost reference] Used only to inform haul-and-hang cost.
• Professional Rig InspectionotherPacific Offshore Rigging[rig cost reference] Used only to inform specialist inspection cost.
• KKMI Bottom PaintingotherKKMI[yard service reference] Bay Area yard reference for antifouling scope.
• Michael Brady answers to XALI diligence questionsotherMichael Brady, owneroffline[owner correspondence] Owner response supplied August 22, 2026; confirms draft, history, hours, sail age, known defects, operating status and inspection permission. Held offline: conversation://seller-email-2026-08-22
• SF Boatworks invoice 2020-11891otherSan Francisco Boatworksoffline[owner record] Dated September 1, 2020. Documents standing rigging and headstay-wire replacement, mast unstep/restep and tuning, rudder sleeve bearing, cutless bearing, packing gland and engine realignment. Held offline: attachment://SF Boatworks rigging and rudder bushings 2020.pdf
• SF Boatworks project invoice 1492otherSan Francisco Boatworksoffline[owner record] Paid 2024 invoice documenting two coats of Micron CSC ablative bottom paint and replacement of a Johnson 30x45x120mm cutless bearing. Held offline: attachment://SF Boatworks last haul out.pdf
• Baja Naval yard statement OR 7750otherBaja Navaloffline[owner record] June-July 2018 statement documenting replacement of seacocks and through-hulls, three epoxy-primer coats, Sea Hawk AF33 antifouling, davit reinforcement, transducer replacement and other work. Held offline: attachment://Baja Naval Sea Cocks and bottom job 2018.pdf
• 2018 Atlas Yacht Service insurance surveyotherAtlas Yacht Serviceoffline[prior survey] Historical in-water insurance survey only: no haul, sea trial or engine specialist. It reported no apparent structural delamination and good eye-level rig/chainplates, but several specifications are plainly erroneous. Held offline: attachment://2004 423 Beneteau Michael Brady.pdf
• Volvo Penta engine and reverse-gear data plateotherVolvo Pentaoffline[equipment plate] Plate reads D2-55, product 868952, serial 5102972931; MS25L reverse gear, serial 3581834, product 50250324727. The plate image does not display an A/B/F suffix. Held offline: attachment://Volvo Data plate.png
• Revere Offshore Commander 2.0 liferaft data plateotherRevere Survival Inc.offline[equipment plate] Six-person Offshore Commander 2.0 with standard emergency pack; plate states a 36-month servicing interval. Held offline: attachment://Life raft data plate.png
• Raymarine ACU-200 compatibilityotherRaymarine[equipment reference] Raymarine specifies ACU-200 for Type 1 hydraulic, mechanical linear and rotary drives with an EV-1 sensor.
• Raymarine ACU-400 compatibilityotherRaymarine[equipment reference] Raymarine specifies ACU-400 for Type 2 and Type 3 mechanical and hydraulic drives.

Uploaded files

Nothing uploaded yet.